Headlight control switch

Type A
Lighting
1 When turning the switch to the
position,
the front parking, tail, license plate and
instrument panel lights come on.
2 When turning the switch to the
position,
the headlights come on and all the other
lights remain on.

Type B

Use the headlights with the engine running to avoid discharging the vehicle battery.

Headlight beam select
1 To select the high beam function, push the
lever forward. The high beam lights come on
and the
light illuminates.
2 Pull the lever back to select the low beam.
3 Pulling and releasing the lever flashes the headlight high beams on and off.
Battery saver system
If the ignition switch is placed in the OFF position
while the headlight switch is in the
or
position, the headlights will turn off after
5 minutes.
Even though the battery saver feature automatically turns off the headlights after a period of time, you should turn the headlight switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.
See also:
Manual windows (if so equipped)
Manual windows (if so equipped)
The side windows can be opened or closed by
turning the hand crank on each door. ...
LATCH lower anchor
WARNING
Failure to follow the warnings and instructions
for proper use and installation of
child restraints could result in serious injury
or death of a child or other passengers
in a sudden stop ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is ...
