Precautions on cruise control

- If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle information display will then blink to warn the driver.

- If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.

- If the SET indicator on the vehicle information display blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer.

- The SET indicator on the vehicle information display may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET or CANCEL switch. To properly set the cruise control system, perform the following procedures.

Do not use the cruise control when

Do not use the cruise control when driving under the following conditions:
- when it is not possible to keep the vehicle at a set speed
- in heavy traffic or in traffic that varies in speed
- on winding or hilly roads
- on slippery roads (rain, snow, ice, etc.)
- in very windy areas
Doing so could cause a loss of vehicle control and result in an accident.

    See also:

    Headlight control switch
    Type A Lighting 1 When turning the switch to the position, the front parking, tail, license plate and instrument panel lights come on. 2 When turning the switch to the position, the headl ...

    Explanation of general maintenance items
    Additional information on the following items with * is found later in this section. Outside the vehicle The maintenance items listed here should be performed from time to time, unless otherwise ...

    Receiving a call
    When you hear the ring tone, push the button on the steering wheel. Once the call has ended, push the button on the steering wheel. NOTE: If you do not wish to take the call when you he ...