Anti-lock Braking System (ABS)

- The Anti-lock Braking System (ABS)

- The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot prevent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remember that stopping distances on slippery surfaces will be longer than on normal surfaces even with ABS. Stopping distances may also be longer on rough, gravel or snow covered roads, or if you are using tire chains.

Always maintain a safe distance from the vehicle in front of you.

Ultimately, the driver is responsible for safety.

- Tire type and condition may also affect braking effectiveness.

— When replacing tires, install the specified size of tires on all four wheels.

— When installing a spare tire, make sure that it is the proper size and type as specified on the Tire and Loading Information label. See “Tire and loading information label” in the “9.

Technical and consumer information” section of this manual.

— For detailed information, see “Wheels and tires” in the “8.

Maintenance and do-it-yourself” section of this manual.

The Anti-lock Braking System (ABS) controls the brakes so the wheels do not lock during hard braking or when braking on slippery surfaces.

The system detects the rotation speed at each wheel and varies the brake fluid pressure to prevent each wheel from locking and sliding. By preventing each wheel from locking, the system helps the driver maintain steering control and helps to minimize swerving and spinning on slippery surfaces.

See also:

Controls
Outside air circulation: Push the air recirculation button to turn off the indicator light on the button. The air flow is drawn from outside the vehicle. Air recirculation: Push the air recircu ...

Replacing
Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push and hold the release tab A , and move the wiper blade down the wiper arm 1 . 3. Insert the n ...

Compact disc (CD) player operation
Place the ignition in the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playin ...