How to use the Vehicle Information Display
Press the button, located on the
instrument
panel just behind the steering wheel, to
display the following modes:
MPG→ MPG/MPH → Time/Miles → Range → Exterior Temperature → Setting → Warning
Fuel economy mode
The fuel economy mode can be selected to display the instant fuel economy since the last reset.
Average speed mode
The average speed mode can be selected to display the average miles per gallon and miles per hour since the last reset.
Time/Miles (km) mode
The time/miles (km) mode can be selected to show the time and distance driven since the last reset.
Range mode
The range mode can be selected to give you an estimation of the distance that can be driven before refueling. The range is constantly calculated based on the amount of fuel in the fuel tank and the actual fuel consumption.
Exterior temperature mode
The exterior temperature mode can be selected to provide you with the temperature outside of your vehicle.
Setting mode
The setting mode allows you to set reminders or
preferences for alerts, maintenance intervals or
language displays.
In the setting mode screen press to
move
to:
● Alert
● Maintenance
● Options
and press to select the menu.
Alert mode
The alert mode allows you to set alerts notifying you of time to rest or icy conditions.
The time to rest alert lets you know when you have been traveling for a long time and may need a break.
The icy alert notifies you that icy driving conditions may exist.
Reset mode
The reset mode can be selected in any screen that allows for preferences to be programmed. Once the screen is selected, you have the option to reset the selected distances or time to a new setting.
Maintenance mode
The maintenance mode allows you to set alerts for the reminding of maintenance intervals for the following:
● tires
● oil
● filter
● other
Set a desired interval by pushing to highlight the maintenance field and pressing . The reset mode will open up and allow you to enter the desired distance.
For additional information, see “Indicators for maintenance” later in this section.
Options mode
The LANGUAGE/UNIT screen will appear when
selecting the “Language/Unit” key and
pressing .
Language: English or French
Unit: US — mile, °F, MPG
Metric — km, °C, l/km
You can select the language and unit using
the button and pressing
.
The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button.
Warning mode
The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of skipping the warning or viewing it in detail.
Warnings can be present for issues such as an open door or low fuel. For more information about potential warnings see “Vehicle information display warnings and indicators” later in this section.
See also:
Interior light
The interior light has a three-position switch and
operates regardless of ignition switch position.
- When the switch is in the ON position (1) ,
the front and rear personal lights will illumin ...
Vehicle recovery (freeing a stuck vehicle)
- Stand clear of a stuck vehicle.
- Do not spin your tires at high speed.
This could cause them to explode
and result in serious injury. Parts of
your vehicle could also overheat
and be da ...
Moisture
Accumulation of sand, dirt and water on the vehicle
body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside
the vehicle and should be removed for drying to
avoi ...