Precautions on cruise control

● If the cruise control system malfunctions, it cancels automatically. The SET indicator light in the instrument panel then blinks to warn the driver.

● If the SET indicator light blinks, turn the cruise control switch off and have the system checked by a NISSAN dealer.

● The SET indicator light may blink when the cruise control switch is turned ON while pushing the ACCEL/RES, COAST/SET, or CANCEL switch. To properly set the cruise control system, use the following procedures.

WARNING

Do not use the cruise control when driving under the following conditions:
● When it is not possible to keep the vehicle at a set speed.
● In heavy traffic or in traffic that varies in speed.
● On winding or hilly roads.
● On slippery roads (rain, snow, ice, etc.).
● In very windy areas.
Doing so could cause a loss of vehicle control and result in an accident.

    See also:

    Vehicle Dynamic Control (VDC) off switch (if so equipped)
    Vehicle Dynamic Control (VDC) off switch (if so equipped) The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in ...

    Sliding the moonroof
    To fully open the moonroof, push the switch toward 1 . To fully close the moonroof, push the switch toward 2 . To open or close the moonroof part way, push the switch in any direction while the ...

    2009 Nissan Maxima review
    As a consumer, I've never considered buying a Nissan Maxima. It just hasn't been on my car radar. After test-driving a 2009 Maxima for a week, it's now on my radar. In fact, I give it the maximum ...