Checking tire pressure

1. Remove the valve stem cap from the

1. Remove the valve stem cap from the tire.
2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge stem and compare to the specification shown on the Tire and Loading Information label.
5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed.
6. Install the valve stem cap.
7. Check the pressure of all other tires, including the spare.

Tire labeling

    See also:

    Initialization
    When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. If the button is pressed before the initialization completes, the syst ...

    Operating range
    The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range. When the Intelligent Key battery is discharged or strong radio waves are present ne ...

    Master warning light
    When the ignition is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display. ● No key warning ● Low fuel w ...