Hitch ball
Choose a hitch ball of the proper size and weight rating for your trailer:
● The required hitch ball size is stamped on most trailer couplers. Most hitch balls also have the size printed on the top of the ball.
● Choose the proper class hitch ball based on the trailer weight.
● The diameter of the threaded shank of the hitch ball must be matched to the ball mount hole diameter. The hitch ball shank should be no more than 1/16” smaller than the hole in the ball mount.
● The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut.
See also:
Engine coolant temperature gauge
Engine coolant temperature gauge
NOTE:
The ignition switch must be placed in the
ON position for the gauge to give a reading.
The gauge indicates the engine coolant temperature.
The engine ...
Backing up on a steep uphill
When backing up the vehicle up a hill, the distance
guide lines and the vehicle width guide
lines are shown closer than the actual distance.
For example, the display shows 3 ft (1.0 m) to the
pl ...
Overview
Small on the outside, big on the inside. Smart technology with
next-generation efficiency. A $10,990 starting M.S.R.P. and low cost of
ownership. New dual injector system and sub-planetary CVT des ...