Technical and consumer information

See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Octane rating tips
Using unleaded gasoline with an octane rating lower than recommended can cause persistent, heavy “spark knock”. (Spark knock is a metallic rapping noise.) If severe, this can lead to engin ...

FM/AM radio with compact disc (CD) changer (if so equipped)
For all operation precautions, see "Audio operation precautions" in this section. VOL/ON·OFF control: Place the ignition switch in the ACC or ON position and push the VOL/ON·OFF cont ...